
ADHESIVES containing flammable liquid
ADR 2025 · Class 3 · 6 variants · carriage of dangerous goods by road
- Class
- 3
- Classif.
- F1
- Pack. group
- I
- Hazard labels
- 3
- Transport cat.
- 1 (D/E)
Variant 1 — packing group I
Variant 2 — packing group II: ADHESIVES containing flammable liquid (vapour pressure at 50 °C more than 110 kPa)
Variant 3 — packing group II: ADHESIVES containing flammable liquid (vapour pressure at 50 °C not more than 110 kPa)
Variant 4 — packing group III
Variant 5 — packing group III: ADHESIVES containing flammable liquid (having a flash-point below 23 °C and viscous according to 2.2.3.1.4) (vapour pressure at 50 °C more than 110 kPa)
Variant 6 — packing group III: ADHESIVES containing flammable liquid (having a flash-point below 23 °C and viscous according to 2.2.3.1.4) (vapour pressure at 50 °C not more than 110 kPa)
Special provisions
SP 640
The physical and technical characteristics mentioned in column (2) of Table A of Chapter 3.2 determine different tank codes for the carriage of substances of the same packing group in ADR tanks. In order to identify these physical and technical characteristics of the product carried in the tank, the following shall be added, to the particulars required in the transport document, only in case of carriage in ADR tanks: "Special provision 640X" where "X" is the applicable capital letter appearing after the reference to special provision 640 in column (6) of Table A of Chapter 3.2. These particulars may, however, be dispensed with in the case of carriage in the type of tank which, for substances of a specific packing group of a specific UN number, meets at least the most stringent requirements.